Ace Glass Instatherm 9601-16 Oil Bath - 1200mL

The Ace Glass Instatherm oil bath is a safer, more precise heating method for the laboratory. It is an Ace Glass proprietary process that fuses a noble metal alloy coating directly onto the glass surface. Once the insulating and protective covering is applied, the Instatherm electrical circuit provides the most rapid and precise heating method available. Thermal lag is minimal with no hot spots. When placed on a magnetic stirrer, it becomes the best heating and mixing combination on the market.

The Ace 9601-16 oil bath is a low form, glass open vessel coated with Instatherm. Designed to operate up to 250ºC, heating response time is very rapid, (5° per minute), with very low thermal lag. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. Baths are designed to run with oil or a heating media. Never run Instatherm baths dry or breakage can occur, especially at higher temperatures. Capacity is without a vessel. The three-prong connector plug is designed to work with Ace temperature controllers (not included) where the output voltage can be automatically limited to match the bath. This bath can also be matched with ACE temperature thermocouple sensors (not included) for complete automatic operation.

NOTE: If using another type temperature controller, voltage should not exceed the rated voltage (120V, 5A).

** SEE LINKS TO CATALOG AND MANUAL FOR MORE INFORMATION