Plastec JET 30 In-Line Acid-Resistant Blower for Fume Hood

The Plastec JET Series centrifugal inline fan is designed to work in highly corrosive air applications such as laboratory exhaust or the chemical industry. JET Series fans can be installed on a roof curb or inline as specified.

Fan housing and motor housing are constructed of strong high-density UV treated polypropylene for maximum corrosion resistance. Screws holding motor housing to roof curb fan base are stainless steel. Metal in the air stream will not be tolerated. JET Series fans outlet should create a high plume of air to ensure maximum dilution of gases to prevent exhaust fumes returning into buildings.

This fan includes curb cap, NEMA disconnect switch, integral drain plug, weather hood, roof curb and 10" PVC vertical backdraft damper (so that acidic fumes do not enter the building when only partial fumes are used).

NOTE: To transition from JET to fumehood and to duct, a reducer/coupling from 8" to 12" may be required (extra cost).

Static Pressure Range: 0.75 to 3 WG

Flow Range: 1000 to 1800 CFM

Phase and Voltage: Single 115/230V & Three 230/460V (specify requirement)

Sound Level (A): RPM 1150=77dB, RPM 1725-88dB

TEFC Motor Option: Yes

Inlet/outlet Diameter: 10" (2 x 10.75” transitions provided)

NOTE: DIFFERENT CONFIGURATIONS AND ACCESSORIES ARE AVAILABLE, DEPENDING ON YOUR REQUIREMENTS - PLEASE INQUIRE AND PROVIDE DETAILS FOR MORE INFORMATION AND PRICING.

** SEE LINK TO BROCHURE FOR MORE INFORMATION